英语翻译DISVANTAGES:the conditions are more critical with heat cutting since the operating pressure of the polymer inside the pelletizer must be between 100 and 150 bars; with other systems there are constraints.With the heat cutting system it is
来源:学生作业帮助网 编辑:作业帮 时间:2024/06/21 14:21:10
![英语翻译DISVANTAGES:the conditions are more critical with heat cutting since the operating pressure of the polymer inside the pelletizer must be between 100 and 150 bars; with other systems there are constraints.With the heat cutting system it is](/uploads/image/z/272484-36-4.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91DISVANTAGES%3Athe+conditions+are+more+critical+with+heat+cutting+since+the+operating+pressure+of+the+polymer+inside+the+pelletizer+must+be+between+100+and+150+bars%3B+with+other+systems+there+are+constraints.With+the+heat+cutting+system+it+is)
英语翻译DISVANTAGES:the conditions are more critical with heat cutting since the operating pressure of the polymer inside the pelletizer must be between 100 and 150 bars; with other systems there are constraints.With the heat cutting system it is
英语翻译
DISVANTAGES:the conditions are more critical with heat cutting since the operating pressure of the polymer inside the pelletizer must be between 100 and 150 bars; with other systems there are constraints.With the heat cutting system it is occasionally necessary to change the die-plate when the type of polymer is changed; with the other systems this is totally not necessary.Both the ribbon and strand die-plate have quite ample exit apertures,therefore no risk of obstruction may happen with heat cutting when the polymer has not been well filtered.
英语翻译DISVANTAGES:the conditions are more critical with heat cutting since the operating pressure of the polymer inside the pelletizer must be between 100 and 150 bars; with other systems there are constraints.With the heat cutting system it is
DISVANTAGES:条件更因为聚合物造粒机内的经营压力必须是100至150条切削热的关键;与其他系统有限制.随着热切割系统是有时要改变模切板时,聚合物类型更改,加上这是完全没有必要的其他系统.这两个功能区和钢绞线模切板有相当充裕的出口孔径,因此不阻塞的危险可能发生时,热切割聚合物还未充分过滤.
DISVANTAGES:自pelletizer内幕聚合物的运作压力一定是在中间100和150以来,状况是更关键有的热剪报;约束是用另一系统那里.用热剪报当类型的聚合物存在改变的时候,系统偶尔是对改变模具-器皿必要的;随着其它系统这个完全是并非必然.和海滩模具-器皿缎带有很大出口孔,因此没有障碍的风险可以当聚合物还没有是顺利的时候,切割有的热透入发生....
全部展开
DISVANTAGES:自pelletizer内幕聚合物的运作压力一定是在中间100和150以来,状况是更关键有的热剪报;约束是用另一系统那里.用热剪报当类型的聚合物存在改变的时候,系统偶尔是对改变模具-器皿必要的;随着其它系统这个完全是并非必然.和海滩模具-器皿缎带有很大出口孔,因此没有障碍的风险可以当聚合物还没有是顺利的时候,切割有的热透入发生.
收起