英语翻译N:Pump speed R:Rack position(mm)(1)Target notch:K (2)Tolerance for racks not indicated:+-0.05(3)Do not anjust boost compensator spring(4)RACK LIMIT(5)Set idle sub-spring(6)Main spring settingI:idle(1)Stopper bolt seettingpump no
来源:学生作业帮助网 编辑:作业帮 时间:2024/06/24 15:38:06
![英语翻译N:Pump speed R:Rack position(mm)(1)Target notch:K (2)Tolerance for racks not indicated:+-0.05(3)Do not anjust boost compensator spring(4)RACK LIMIT(5)Set idle sub-spring(6)Main spring settingI:idle(1)Stopper bolt seettingpump no](/uploads/image/z/5684215-31-5.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91N%EF%BC%9APump+speed+R%EF%BC%9ARack+position%28mm%29%281%29Target+notch%EF%BC%9AK+%282%29Tolerance+for+racks+not+indicated%EF%BC%9A%2B-0.05%283%29Do+not+anjust+boost+compensator+spring%284%29RACK+LIMIT%285%29Set+idle+sub-spring%286%29Main+spring+settingI%EF%BC%9Aidle%281%29Stopper+bolt+seettingpump+no)
英语翻译N:Pump speed R:Rack position(mm)(1)Target notch:K (2)Tolerance for racks not indicated:+-0.05(3)Do not anjust boost compensator spring(4)RACK LIMIT(5)Set idle sub-spring(6)Main spring settingI:idle(1)Stopper bolt seettingpump no
英语翻译
N:Pump speed
R:Rack position(mm)
(1)Target notch:K
(2)Tolerance for racks not indicated:+-0.05
(3)Do not anjust boost compensator spring
(4)RACK LIMIT
(5)Set idle sub-spring
(6)Main spring setting
I:idle
(1)Stopper bolt seetting
pump normal
stop the pump
(1)Use the hole at R=aa
(2)Speed=bb,rack position=cc(sealed at delivery)
pump vertical direction
英语翻译N:Pump speed R:Rack position(mm)(1)Target notch:K (2)Tolerance for racks not indicated:+-0.05(3)Do not anjust boost compensator spring(4)RACK LIMIT(5)Set idle sub-spring(6)Main spring settingI:idle(1)Stopper bolt seettingpump no
护士:泵转速
接待员:架位置(毫米).
(1).目标缺口:凯西
(2).宽容并不表明:从负0.05克到正0.1以上架上
(3).不要anjust增加补偿器弹簧吗
(四).架限制
(五).sub-spring设定闲置
(六).主要的春天
空闲时,我说:
(1).seetting塞子螺栓
泵正常
停泵
(1).使用这个洞在R = aa
(2).速度= bb,架位置= cc(在交货).
垂直的方向.泵
什么东西哇、真的很麻烦找专业翻译吧,这都不准的